Installation requires no special tools beyond a standard bike toolkit. The complete process typically takes 30–60 minutes for first-time installers.
Required tools:
4mm Allen Key
2mm Allen Key
Chain Tool
Cable Cutter
Torque Wrench
WHEELTOP App (iOS / Android)
Installation steps:
- 1Remove your existing rear derailleur and clean the derailleur hanger thread.
- 2Mount the WHEELTOP rear derailleur onto the hanger. Torque: 8–10 Nm.
- 3Route the chain through the derailleur and join using the quick link provided.
- 4Mount the shifters onto your handlebars and pair them to the derailleur via the WHEELTOP App.
- 5Perform initial calibration in the app by selecting the corresponding speed for a preliminary test.
- 6Test shift through all gears and fine-tune trim via the app if needed.
Note: Front derailleur installation follows a similar process. Refer to the product-specific manual in the Download Center for detailed guidance.
